Purpose: The main load-bearing component in the ceiling system, usually connected with the hanger rod, and provides installation nodes for the surface cover panel.

Purpose: Slotting again without affecting the load-bearing capacity of the keel, mainly for curved ceilings.

Purpose: Fixed connection at the ceiling, side walls, and corner of the keel frame of the building. There are connection holes on both sides, which can be fixedly connected with horizontal keels and insertable connectors.

Usage: There are holes on both sides, which can be fixed directly on the top, and the lower part can be adjusted and fixed with horizontal keel joints.

Purpose: Used to fix the connection between the two ends and the angle keel, with corresponding connection holes set for the angle keel.

Purpose: Fixed to the ceiling, side walls, and corner joints of the keel frame of the building. One side is equipped with a connecting hole, which can be replaced with an angle keel for use.

Purpose: Mainly for double eyelid styling design.

Purpose: Easier when making reflector grooves.

Usage: Can be processed into different curved shapes to meet various arc or wave design requirements.

Purpose: Used for the docking of two horizontal keels or the extension of a single end horizontal keel.

Purpose: Used to match W keel for double eyelid styling.

Purpose: Used to connect the angle keel and the transverse keel, with adjustable height and width functions, the maximum adjustable height is 40mm and the maximum adjustable width is 20mm

Purpose: Used to hide pipes, wires, or as decorative flat components.

Purpose: Used at the corner of the shape, connecting and reinforcing the corner keel with the horizontal keel to prevent the keel from loosening, cracking, and deforming.

Purpose: Connect the horizontal keel with the horizontal keel vertically in the plane, mostly used at the inlet and outlet of central air conditioning.